Okay, so I’ve been wanting a selenite crystal bracelet for a while now. I finally decided to just go for it and make my own! It turned out to be way easier than I thought, and I’m super happy with how it looks.
Gathering My Supplies
First things first, I needed to get my hands on some stuff. I already had some basic jewelry-making tools, like pliers and wire cutters. But I needed:
- Selenite beads: I found some really pretty, smooth, round ones online. I made sure to get enough for my wrist size.
- Elastic cord: I picked a clear, stretchy cord that seemed strong enough.
- (Optional) Spacer beads: I got a few tiny silver beads to put between the selenite ones, just for a little extra sparkle.
Getting Started
I started by measuring my wrist with a piece of string. This gave me a good idea of how long the bracelet needed to be. Then, I cut a piece of the elastic cord, adding a few extra inches to make tying easier. Better to have too much than too little, right?
Stringing the Beads
Next, the fun part! I started stringing the beads onto the cord. I went with a simple pattern: selenite bead, silver spacer bead, selenite bead, and so on. It took a little bit of patience, but it was actually kind of relaxing.
Finishing It Off
Once all the beads were on, I carefully tied the ends of the elastic cord together. I used a surgeon’s knot, which I learned from a YouTube video – it’s supposed to be super secure. I tied it really, really tight, like three or four times, just to be sure. Then, I trimmed off the extra cord, leaving just a little bit so it wouldn’t unravel. I also added some special glue for jewelry, and then,I tugged the knot into hole of the beads.
The Finished Product!
And that’s it! My very own selenite crystal bracelet. It’s so pretty and delicate, and I love the way the light catches the beads. Plus, I made it myself, which makes it feel even more special. I’m definitely going to wear this all the time!
